Modifying Cars
-
Building a Track Car – Progress yes!
Time moves on and so does the project Miata. A lot of focus has been on getting the front suspension done. The right side was torn down and the lower control arm was cleaned and its original bushings were pressed… Continue reading
-
Building a Track Car – sweating the details
Many times the modifications that take place on the Miata are pretty cut and dried. One item is unbolted and the replacement is put back in its place. It takes time and a little care, but no reengineering required. Then… Continue reading
-
Building a Track Car – on to the drivetrain
It was time to move on to the drivetrain of this roadster. With 150,000 plus miles on the clutch I really didn’t want to trust it to a track session or two before I replaced it. With a little Internet… Continue reading
-
Building a Track Car – Topping the Miata and adding a Hard Dog
A couple of posts back we took a road trip to Bethania to visit the garage where Hard Dog roll bars are made and sold. It was a fun trip and we hope to make it back again when the… Continue reading
-
Building a Track Car – BIG brakes
With the rear suspension completed (minus the V-Maxx coil-overs) it was time to get the rear half of the big brake kit on that we had purchased from GoMiata. The kit is developed by Good-Win Racing and had gone through a recent… Continue reading
-
Building a Track Car – The rear suspension comes together at last!
In an earlier post we took the rear suspension apart, although not without some trouble. The axles were just about frozen into the splines of the rear hubs. With a great deal of effort we were finally able to extricate… Continue reading
-
Building a Track Car – Time for a road trip to Bethania
The Internet has been a boon for those of us looking for ways to improve our rides. It has amazing search capabilities and its ability to aid in shopping can save a lot of heartache and gasoline. But sometimes it… Continue reading
-
Building a Track Car – Thoughts on the Miata
As I wait for more parts to arrive I am continually reviewing what needs to be done to the car to make it track worthy. There will no longer be a need for Air conditioning so I will remove all… Continue reading
-
Building a Track Car – Rear suspension on the Miata
The Miata project continues with more work on the rear suspension and drive train. The axles have proven to be a real sore point. They are held on to the hub with splines and these just did not want to… Continue reading
-
Track Car – More work on the Miata
The Miata track car project is making progress. One of the first things to accomplish was to remove the aftermarket anti-theft system that had been installed in the car. The last thing I needed was to have the anti-theft system… Continue reading




